Adjust-O™ Magnet Squares
The fast & easy way to hold metal workpieces at 30°/ 60°, 45°, and 90°.
Turn the magnet Off or at the mid-point position when setting up, turn On when you’re ready to work. Fast and safe set-up!
Ideal for round and square tubing, angle, and flat stock.
Easy to clean. Simply turn Off and wipe.
U.S. PAT. 7009480
ON / OFF Switch for quick setup. Mid point switch position for alignment / easy part placement.
Made with strong rare earth magnets. Fully enclosed for easier cleaning.
DOUBLE Plate - Optimize magnetic full force ( HD models )
|Max. Pull Force (lb)||Dimension (in)||Weight (lb)||Part No.|
|65||4.4 x 3.8 x 1||1||MSA45|
|90||4.4 x 3.8 x 1.1||1.5||MSA46-HD|
|75||6 x 5.1 x 1.3||2.2||MSA47|
|160||6 x 5.1 x 1.4||3||MSA48-HD|
|140||6 x 5.1 x 1.4||3||MSA53-HD|
* Magnetic force is based on the longest side of Magnet with 3/8″ thick steel.
* Must be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 175ºF / 80ºC and above.